Most shades are easy to care for and require only a minimum amount of upkeep.

Dusting - Stroke lightly with a feather duster or clean, soft cloth.

Vacuum lightly - A vacuum cleaner brush attachment may also be used for removing dust.

Sponge or Spot Cleaning - When needed, fabric can be cleaned by gently blotting with a soft, damp cloth or sponge using lukewarm water and a mild detergent.

Take extra care when cleaning opaque or "blackout" fabrics to avoid creasing and pilling.

Pleated shade material is coated with a special formula that aids the pleat in holding its shape and retaining its pleat. Take care when cleaning pleated shades so this coating is not removed.

Bathtub Cleaning - SOME types of cellular shades can be cleaned by immersing them in the bathtub. Immersion IS NOT recommended for pleated shades, roman shades and roller shades. To clean the entire shade, immerse the assembly in lukewarm water with a mild detergent and move it around lightly with your fingers. Wash for about five minutes, then rinse with clean water. Close the shade before removing it from the rinse water. Holding the rails, tilt the shade to allow excess water to escape. Re-install the damp shade back into the window opening and lower the shade all the way to allow it to dry completely.

Ultrasonic Cleaning - Shades can be ultrasonically cleaned by a professional. If using this service, a mild detergent solution must be specified. The headrail cannot be immersed in the solution and the shades must be allowed to dry in the completely lowered position.

Follow Manufacturer Advice . . . It is best to use the products and procedures recommended by the manufacturer for cleaning your shades.